Skip to main content

Perdoo adds free tier to its OKR service, adding a fresh wrinkle to an accelerating market

Perdoo, a Berlin-based OKR-focused software startup, has decided to make its basic service free, potentially shaking up its growing, and somewhat crowded, market. “Objectives and Key Results,” a planning and management technique usually shortened to “OKRs,” is a hot space for software startups, with several raising in recent months.

WorkBoard and Gtmhub, for example, each raised capital for their OKR products in the last two months. WorkBoard raised $30 million, while Gtmhub added $9 million to its coffers. So many companies are operating in the space that TechCrunch created a compendium of sorts listing the players, simply to get our mind around who is active in the space as a partial, or pure participant.

Perdoo is a different animal than its rivals. The company, instead of tapping into an obviously interested venture capital pool, is a largely bootstrapped affair, it told TechCrunch. That makes its decision all the more curious. Why would a company with, theoretically, at least, less room to maneuver, make a portion of its product cost less than before? To understand, we got on the phone with Perdoo co-founder Henrik-Jan van der Pol to dig in.

Pricing

OKR software runs from cheap to expensive, with WorkBoard not listing prices on its website (that we could find while compiling this entry), to $1 per user per month for Gtmhub’s lowest-priced tier. Most providers in the space offer enterprise offerings that cost more. (Before offering a free tier, Perdoo only charged per user per month for its service, with sliding discounts for volume.)

During a call with TechCrunch, van der Pol explained his company’s move to undercut other companies’ lower-cost pricing, saying that the OKR market is “still new for a lot of organizations, meaning that they don’t have a budget available.” Those players, he said, “start with spreadsheets, which creates a lot of hassle and actually decreases their chances of success.” Those firms that need tooling but didn’t have ready budget open for the cost were why Perdoo “decided to make that switch to freemium, and give people a solid and free version that they can get started with that has very few limitations,” van der Pol continued.

Free Perdoo users can track as many goals as they’d like with as many users as they’d like. According to the co-founder, his company “looked at what functionality people currently use that build their own [OKR] tools” and decided to give those away.

Perdoo isn’t insane, mind. The company is still selling a paid version of its product with more features, and the company must hope that free users convert to its paid service over time.

In a sense, the freemium move is a gambit of sorts: By offering functionality for free, perhaps Perdoo can attract to itself users that might not have otherwise selected its service (perhaps choosing a provider with more available capital for marketing expenses) — users that might convert to paying customers later on, naturally.

Money

According to van der Pol, “in order to sustain a free offer, you need to be cash flow positive and profitable,” telling TechCrunch that his company is both.

Here we can see the power of not raising lots of money. Because Perdoo only raised angel money and has paid its own way since, the company can afford (literally) to offer a lot for nothing. It doesn’t have investors shouting over its shoulder about possible cannibalizing its own market, or anything similar.

So: Lots of venture dollars are powering several neat startups that are growing like mad, with WorkBoard and Gtmhub posting huge ARR gains in recent years to the tune of hundreds of percent. What impact Perdoo’s move might have on their growth, or product choices, won’t be clear for a while, if it has any at all. But Perdoo did just reprice basic OKR software to zero.

In the middle of a venture-capital powered growth war, that’s fascinating.



from TechCrunch https://ift.tt/2U8UA9B
Labels:

Comments

Post a Comment

Popular posts from this blog

How To Play Doom – And More – On An NES

Doom was a breakthrough game for its time, and became so popular that now it’s essentially the “Banana For Scale” of hardware hacking. Doom has been ported to countless devices, most of which have enough processing ability to run the game natively. Recently, this lineup of Doom-compatible devices expanded to include the NES even though the system definitely doesn’t have enough capability to run it without special help. And if you want your own Doom NES cartridge, this video will show you how to build it . We featured the original build from [TheRasteri] a while back which goes into details about how it’s possible to run such a resource-intensive game on a comparatively weak system. You just have to enter the cheat code “RASPI”. After all the heavy lifting is done, it’s time to put it into a realistic-looking cartridge. To get everything to fit in the donor cartridge, first the ICs in the cartridge were removed (except the lockout IC) and replaced with custom ROM chips. Some modifica...
Post a Comment
Read more

Try NopSCADlib for your Next OpenSCAD Project

Most readers of this site are familiar by now with the OpenSCAD 3D modeling software, where you can write code to create 3D models. You may have even used OpenSCAD to output some STL files for your 3D printer. But for years now, [nophead] has been pushing OpenSCAD further than most, creating some complex utility and parts libraries to help with modeling, and a suite of Python scripts that generate printable STLs, laser-ready DXFs, bills of material, and human-readable assembly instructions complete with PNG imagery of exploded-view sub-assemblies. Recently [nophead] tidied all of this OpenSCAD infrastructure up and released it on GitHub as NopSCADlib . You can find out more by browsing through the example projects and README file in the repository, and by reading the announcement blog post on the HydraRaptor blog . Some functionality highlights include: a large parts library full of motors, buttons, smooth rod, et cetera many utility functions to help with chamfers, fillets, precis...
Post a Comment
Read more

The Newbie’s Guide To JTAG

Do you even snarf? If not, it might be because you haven’t mastered the basics of JTAG and learned how to dump, or snarf, the firmware of an embedded device. This JTAG primer will get you up to snuff on snarfing, and help you build your reverse engineering skills. Whatever your motivation for diving into reverse engineering devices with microcontrollers, JTAG skills are a must, and [Sergio Prado]’s guide will get you going. He starts with a description and brief history of the Joint Test Action Group interface, from its humble beginnings as a PCB testing standard to the de facto standard for testing, debugging, and flashing firmware onto devices. He covers how to locate the JTAG pads – even when they’ve been purposely obfuscated – including the use of brute-force tools like the JTAGulator . Once you’ve got a connection, his tutorial helps you find the firmware in flash memory and snarf it up to a file for inspection, modification, or whatever else you have planned. We always apprec...
Post a Comment
Read more