Skip to main content

Facebook will pay $550 million to settle class action lawsuit over privacy violations

Facebook will pay over half a billion dollars to settle a class action lawsuit that alleged systematic violation of an Illinois consumer privacy law. The settlement amount is large indeed, but a small fraction of the $35 billion maximum the company could have faced.

Class members — basically Illinois Facebook users from mid-2011 to mid-2015 — may expect as much as $200 each, but that depends on several factors. If you’re one of them you should receive some notification once the settlement is approved by the court and the formalities are worked out.

The proposed settlement would require Facebook to obtain consent in the future from Illinois users for such purposes as face analysis for automatic tagging.

This is the second major settlement from Facebook in six months; an seemingly enormous $5 billion settlement of FTC violations was announced over the summer, but it’s actually a bit of a joke.

The Illinois suit was filed in 2015, alleging that Facebook collected facial recognition data on images of users in the state without disclosure, in contravention of the state’s 2008 Biometric Information Privacy Act (BIPA). Similar suits were filed against Shutterfly, Snapchat, and Google.

Facebook pushed back in 2016, saying that facial recognition processing didn’t count as biometric data, and that anyway Illinois law didn’t apply to it, a California company. The judge rejected these arguments with flair, saying the definition of biometric was “cramped” and the assertion of Facebook’s immunity would be “a complete negation” of Illinois law in this context.

Facebook was also suspected at the time of heavy lobbying efforts towards defanging BIPA. One state senator proposed an amendment after the lawsuit was filed that would exclude digital images from BIPA coverage, which would of course have completely destroyed the case. It’s hard to imagine such a ridiculous proposal was the suggestion of anyone but the industry, which tends to regard the strong protections of the law in Illinois as quite superfluous.

As I noted in 2018, the Illinois Chamber of Commerce proposed the amendment, and a tech council there was chaired by Facebook’s own Manager of State Policy at the time. Facebook told me then that it had not taken any position on the amendment or spoken to any legislators about it.

2019 took the case to the 9th U.S. Circuit Court of Appeals, where Facebook was again rebuffed; the court concluded that “the development of face template using facial-recognition technology without consent (as alleged here) invades an individual’s private affairs and concrete interests. Similar conduct is actionable at common law.”

Facebook’s request for a rehearing en banc, which is to say with the full complement of judges there present, was unanimously denied two months later.

At last, after some 5 years of this, Facebook decided to settle, a representative told TechCrunch, “as it was in the best interest of our community and our shareholders to move past this matter.” Obviously it admits to no wrongdoing.

The $550 million amount negotiated is “the largest all-cash privacy class action settlement to date,” according to law firm Edelson PC, one of three that represented the plaintiffs in the suit.

“Biometrics is one of the two primary battlegrounds, along with geolocation, that will define our privacy rights for the next generation,” said Edelson PC founder and CEO Jay Edelson in a press release. “We are proud of the strong team we had in place that had the resolve to fight this critically important case over the last five years. We hope and expect that other companies will follow Facebook’s lead and pay significant attention to the importance of our biometric information.”



from TechCrunch https://ift.tt/38JCAGS

Comments

Popular posts from this blog

How To Play Doom – And More – On An NES

Doom was a breakthrough game for its time, and became so popular that now it’s essentially the “Banana For Scale” of hardware hacking. Doom has been ported to countless devices, most of which have enough processing ability to run the game natively. Recently, this lineup of Doom-compatible devices expanded to include the NES even though the system definitely doesn’t have enough capability to run it without special help. And if you want your own Doom NES cartridge, this video will show you how to build it . We featured the original build from [TheRasteri] a while back which goes into details about how it’s possible to run such a resource-intensive game on a comparatively weak system. You just have to enter the cheat code “RASPI”. After all the heavy lifting is done, it’s time to put it into a realistic-looking cartridge. To get everything to fit in the donor cartridge, first the ICs in the cartridge were removed (except the lockout IC) and replaced with custom ROM chips. Some modifica...

The Flexible Permanence of Copper Tape Circuits

Somewhere between shoving components into a breadboard temporarily and committing them to a piece of protoboard or a PCB lies the copper tape method. This flexible Manhattan-style method of circuitry formed the basis for [Bunnie Huang]’s Chibitronics startup, and has since inspired many to stop etching boards and start fetching hoards of copper tape. [Hales] hit the ground running when he learned about this method , and has made many a copper tape circuit in the last year or so. He offers several nice tips on his site that speak from experience with this method, and he’ll even show you how to easily work an SMD breakout board into the mix. Generally speaking, [Hales] prefers plywood as the substrate to paper or cardboard for durability. He starts by drawing out the circuit and planning where all the tape traces will go and how wide they need to be. Then he lays out copper traces and pads, rubs the tape against the substrate to make it adhere strongly, and reinforces joints and laps w...

The Newbie’s Guide To JTAG

Do you even snarf? If not, it might be because you haven’t mastered the basics of JTAG and learned how to dump, or snarf, the firmware of an embedded device. This JTAG primer will get you up to snuff on snarfing, and help you build your reverse engineering skills. Whatever your motivation for diving into reverse engineering devices with microcontrollers, JTAG skills are a must, and [Sergio Prado]’s guide will get you going. He starts with a description and brief history of the Joint Test Action Group interface, from its humble beginnings as a PCB testing standard to the de facto standard for testing, debugging, and flashing firmware onto devices. He covers how to locate the JTAG pads – even when they’ve been purposely obfuscated – including the use of brute-force tools like the JTAGulator . Once you’ve got a connection, his tutorial helps you find the firmware in flash memory and snarf it up to a file for inspection, modification, or whatever else you have planned. We always apprec...