Skip to main content

Tesla to begin delivering China-built Model 3 cars next week

Tesla will start making the first deliveries of its Shanghai-built Model 3 sedans on Monday, Bloomberg reports. The cars are rolling off the assembly line at the new Tesla Shanghai Gigafactory, which is operational but which will also be expanding in future thanks to a fresh $1.4 billion injection in local funding reported earlier this week.

The Shanghai gigafactory’s construction only began earlier this year, and its turnaround time in terms of construction and actually producing vehicles is impressive. The Model 3 vehicles built in China will provide a price break vs. imported vehicles, since cars made in-country enjoy exemption from a 10% tax applied to imported cars. Tesla Model 3s build in China will also get a government purchase incentive of as much as $3,600 per car, which should drive even higher sales.

Tesla’s Shanghai factory is its first manufacturing facility outside of the country, though there’s also a gigafactory in the works in Germany just outside of Berlin, and Tesla has teased plans for at least a fifth gigafactory with a location to be revealed later.

Tesla’s production capacity in Shanghai probably isn’t ver high-volume to begin with, although the company has said previously it was targeting a production rate of around 1,000 cars per week by year’s end, with potential to ramp up to around 3,000 cars per week. Tax breaks and incentives have helped demand for the Model 3 in China grow significantly in 2019, so any progress on production in-country is bound to help lift global vehicle sales.



from TechCrunch https://ift.tt/2QsIeFO
Labels:

Comments

Post a Comment

Popular posts from this blog

How To Play Doom – And More – On An NES

Doom was a breakthrough game for its time, and became so popular that now it’s essentially the “Banana For Scale” of hardware hacking. Doom has been ported to countless devices, most of which have enough processing ability to run the game natively. Recently, this lineup of Doom-compatible devices expanded to include the NES even though the system definitely doesn’t have enough capability to run it without special help. And if you want your own Doom NES cartridge, this video will show you how to build it . We featured the original build from [TheRasteri] a while back which goes into details about how it’s possible to run such a resource-intensive game on a comparatively weak system. You just have to enter the cheat code “RASPI”. After all the heavy lifting is done, it’s time to put it into a realistic-looking cartridge. To get everything to fit in the donor cartridge, first the ICs in the cartridge were removed (except the lockout IC) and replaced with custom ROM chips. Some modifica...
Post a Comment
Read more

The Flexible Permanence of Copper Tape Circuits

Somewhere between shoving components into a breadboard temporarily and committing them to a piece of protoboard or a PCB lies the copper tape method. This flexible Manhattan-style method of circuitry formed the basis for [Bunnie Huang]’s Chibitronics startup, and has since inspired many to stop etching boards and start fetching hoards of copper tape. [Hales] hit the ground running when he learned about this method , and has made many a copper tape circuit in the last year or so. He offers several nice tips on his site that speak from experience with this method, and he’ll even show you how to easily work an SMD breakout board into the mix. Generally speaking, [Hales] prefers plywood as the substrate to paper or cardboard for durability. He starts by drawing out the circuit and planning where all the tape traces will go and how wide they need to be. Then he lays out copper traces and pads, rubs the tape against the substrate to make it adhere strongly, and reinforces joints and laps w...
Post a Comment
Read more

The Newbie’s Guide To JTAG

Do you even snarf? If not, it might be because you haven’t mastered the basics of JTAG and learned how to dump, or snarf, the firmware of an embedded device. This JTAG primer will get you up to snuff on snarfing, and help you build your reverse engineering skills. Whatever your motivation for diving into reverse engineering devices with microcontrollers, JTAG skills are a must, and [Sergio Prado]’s guide will get you going. He starts with a description and brief history of the Joint Test Action Group interface, from its humble beginnings as a PCB testing standard to the de facto standard for testing, debugging, and flashing firmware onto devices. He covers how to locate the JTAG pads – even when they’ve been purposely obfuscated – including the use of brute-force tools like the JTAGulator . Once you’ve got a connection, his tutorial helps you find the firmware in flash memory and snarf it up to a file for inspection, modification, or whatever else you have planned. We always apprec...
Post a Comment
Read more