Skip to main content

All the high-tech, powerful vehicles TechCrunch reviewed in 2019

TechCrunch occasionally reviews cars. Why? Vehicles are some of the most complex, technical consumer electronics available. It’s always been that way. Vehicles, especially those available for the consumer, are the culmination of bleeding-edge advancements in computing, manufacturing, and material sciences. And some can go fast — zoom zoom.

Over the past 12 months, we’ve looked at a handful of vehicles from ultra-luxury to the revival of classic muscle cars. It’s been a fun year full of road trips and burnouts.


In the last weeks of 2018, we drove Audi’s first mass-produced electric vehicle. The familiar e-tron SUV.

I spent a day in an Audi e-tron and drove it hundreds of miles over Abu Dhabi’s perfect tarmac, around winding mountain roads and through sand-covered desert passes. The e-tron performs precisely how a buyer expects a mid-size Audi SUV to perform. On the road, the e-tron is eager and quiet, while off the road, over rocks, and through deep sand, it’s sturdy and surefooted.

Read the review here.

A few months later, we got an Audi RS 5 Sportback for a week. It was returned with significantly thinner tires.

This five-door sedan is raw and unhinged, and there’s an unnatural brutality under the numerous electronic systems. Its twin-turbo 2.9L power plant roars while the Audi all-wheel drive system keeps the rubber on the tarmac. It’s insane, and like most vacations, it’s lovely to visit, but I wouldn’t want to live with the RS 5.

Read the review here.

At the end of Spring, a 2019 Bentley Continental GT blew us away.

The machine glides over the road, powered by a mechanical symphony performing under the hood. The W12 engine is a dying breed, and it’s a shame. It’s stunning in its performance. This is a 200 mph vehicle, but I didn’t hit those speeds. What surprised me the most is that I didn’t need to go fast. The new Continental GT is thrilling in a way that doesn’t require speed. It’s like a great set of speakers or exclusive liquor. Quality over quantity, and in this mechanical form, the quality is stunning.

Read the review here.

In late May, we drove Audi’s 2019 Q8 from Michigan to New York City and back. To the passengers, it was comfortable. For the driver (me), it was unpleasant.

Yet after spending a lot of time in the Q8, I found it backwards. Most crossovers provide the comfort of a sedan with the utility of an SUV. This one has the rough comfort of an SUV with the limited utility of a sedan. Worse yet, driving the Q8 around town can be a frustrating experience.

Read the review here.

2019 bmw i8 1

The BMW i8 is a long for this world, so we took it out for one last spin, several years after reviewing it just after it was released.

The BMW i8 is just a stepping stone in BMW’s history. An oddball. It’s a limited-edition vehicle to try out new technology. From what I can tell, BMW never positioned the i8 as a top seller or market leader. It was an engineer’s playground. I love it.

Read the review here.

2020 gt500 3

This fall, we went to Las Vegas to get the first taste of Ford’s latest GT500. It’s exhilarating and yet manageable.

During my short time with the 2020 GT500, I never felt overwhelmed with power when driving it on city streets. The 2020 GT500 is an exercise in controlled restraint. Somehow this 760 HP Ford can hit 60 mph in 3.3 seconds and still be easy to putz around town. It’s surprising and a testament to the advances made within Dearborn.

Read the review here.

McLaren Senna GTR doors

Supercars are often an exercise in excess, and yet the McLaren Senna GTR is something different. It’s a testament to how McLaren operates.

Sliding into the driver’s seat, I feel at home. The cockpit is purposeful. The track was cold with some damp spots, and the GTR is a stiff, lightweight race car with immense power on giant slick tires. Conventional wisdom would suggest the driver — me in this case — should slowly work up to speed in these otherwise treacherous conditions. However, the best way to get the car to work is to get the temperature in the tires by leaning on it a bit right away. Bell sent me out in full “Race” settings for both the engine and electronic traction and stability controls. Within a few corners — and before the end of the lap — I had a good feel for the tuning of the ABS, TC, and ESC, which were all intuitive and minimally invasive.

Read the review here.

Quick thoughts on other cars we drove this year.

2020 BMW M850i xDrive Coupe
A grand tourer for the modest millionaire. With all-wheel drive, a glorious engine, and heated armrests, the 850i is exciting and comfortable anywhere.

2019 Ford GT350
Forget the GT500. The GT350, with a standard gearbox and naturally aspirated 5.2L V8, is a pony car that gives the driver more control and more thrills than its more expensive, supercharged cousin.

2020 BMW M2 Competition Coupe
This small BMW coupe is perfectly balanced. It’s powerful, controllable, and, during our week with it, gave endless thrills (and donuts). This was my favorite car this year.

2019 Ford Raptor
Need a pickup that’s faster than a sports car? You probably don’t, but if so, we discovered the Raptor was capable and enjoyable if not a bit unwieldy in traffic thanks to its wide body.



from TechCrunch https://ift.tt/39n3RjG

Comments

Popular posts from this blog

How To Play Doom – And More – On An NES

Doom was a breakthrough game for its time, and became so popular that now it’s essentially the “Banana For Scale” of hardware hacking. Doom has been ported to countless devices, most of which have enough processing ability to run the game natively. Recently, this lineup of Doom-compatible devices expanded to include the NES even though the system definitely doesn’t have enough capability to run it without special help. And if you want your own Doom NES cartridge, this video will show you how to build it . We featured the original build from [TheRasteri] a while back which goes into details about how it’s possible to run such a resource-intensive game on a comparatively weak system. You just have to enter the cheat code “RASPI”. After all the heavy lifting is done, it’s time to put it into a realistic-looking cartridge. To get everything to fit in the donor cartridge, first the ICs in the cartridge were removed (except the lockout IC) and replaced with custom ROM chips. Some modifica...

Try NopSCADlib for your Next OpenSCAD Project

Most readers of this site are familiar by now with the OpenSCAD 3D modeling software, where you can write code to create 3D models. You may have even used OpenSCAD to output some STL files for your 3D printer. But for years now, [nophead] has been pushing OpenSCAD further than most, creating some complex utility and parts libraries to help with modeling, and a suite of Python scripts that generate printable STLs, laser-ready DXFs, bills of material, and human-readable assembly instructions complete with PNG imagery of exploded-view sub-assemblies. Recently [nophead] tidied all of this OpenSCAD infrastructure up and released it on GitHub as NopSCADlib . You can find out more by browsing through the example projects and README file in the repository, and by reading the announcement blog post on the HydraRaptor blog . Some functionality highlights include: a large parts library full of motors, buttons, smooth rod, et cetera many utility functions to help with chamfers, fillets, precis...

The Newbie’s Guide To JTAG

Do you even snarf? If not, it might be because you haven’t mastered the basics of JTAG and learned how to dump, or snarf, the firmware of an embedded device. This JTAG primer will get you up to snuff on snarfing, and help you build your reverse engineering skills. Whatever your motivation for diving into reverse engineering devices with microcontrollers, JTAG skills are a must, and [Sergio Prado]’s guide will get you going. He starts with a description and brief history of the Joint Test Action Group interface, from its humble beginnings as a PCB testing standard to the de facto standard for testing, debugging, and flashing firmware onto devices. He covers how to locate the JTAG pads – even when they’ve been purposely obfuscated – including the use of brute-force tools like the JTAGulator . Once you’ve got a connection, his tutorial helps you find the firmware in flash memory and snarf it up to a file for inspection, modification, or whatever else you have planned. We always apprec...