Skip to main content

CDC issues new guidance against gatherings of 50 or more people for the next 8 weeks

The U.S. Centers for Disease Control and Prevention (CDC) has updated its guidance (also available in full below) regarding large group gatherings and events in light of the ongoing effort to combat the spread of coronavirus in the country. The new CDC guidance recommends against holding any events or group gatherings of 50 or more people across the U.S., and notes that this guidance applies for at least the next eight weeks.

The updated guidance, issued on Sunday night, also indicates that gatherings (of any size) should only take place provided that they can do so while also honouring the recommendations that exist around limiting exposure to especially vulnerable populations, as well as those around hand hygiene (hand washing and sanitization) and social distancing (increasing personal space to lower the chances of transmission from an infected individual).

As with less stringent, earlier guidance against larger group gatherings, the CDC notes that this guideline should not be considered to apply to the “day to day operation of organizations such as schools, institutes of higher learning, or businesses.” Nor, the CDC says, is it meant to “supersede the advice of local public health officials.”

It is meant to slow the pace of transmission, and to reduce the chances of introduction of the virus to communities where it isn’t present, the agency says. Social distancing and isolation are the best possible course for reducing the impact of the current coronavirus pandemic to levels even approaching manageability by health care professionals, according to all experts qualified to advise on the subject.

Despite the qualification in this CDC guidance regarding the suspension of school operations and businesses, many of these measures are being implemented at the local and state level. New York City public schools will be shut down as of next week, Mayor Bill de Blasio’s office announced on Sunday after mounting pressure to follow a number of other states in this measure, and multiple other states have introduced measures to close or limit the operating hours and capacities of restaurants and bars this weekend as the situation continues to evolve.

This new guidance extends through April and into May, which is longer than a lot of the existing tentative end dates for existing social distancing and coronavirus-related travel restriction measures put in place by private companies and event organizers. It’s clear from this modification of its advice on the matter that the CDC anticipates greater impact for longer durations, at least when it comes to high-risk situations like densely packed groups of many individuals including conferences, concerts and trade shows – but extending even to much smaller gatherings like weddings and large birthday parties.

Despite many new efforts to limit group gatherings, this past weekend saw both a fair number of revellers gathering to celebrate St. Patrick’s Day, flying in the face of the good advice of experts, and major backlogs at airports caused by arrivals waylaid by a more stringent, but also more confused and potentially dangerous federally-instituted screening process for arriving passengers at major airports.



from TechCrunch https://ift.tt/2WepPB5
Labels:

Comments

Post a Comment

Popular posts from this blog

How To Play Doom – And More – On An NES

Doom was a breakthrough game for its time, and became so popular that now it’s essentially the “Banana For Scale” of hardware hacking. Doom has been ported to countless devices, most of which have enough processing ability to run the game natively. Recently, this lineup of Doom-compatible devices expanded to include the NES even though the system definitely doesn’t have enough capability to run it without special help. And if you want your own Doom NES cartridge, this video will show you how to build it . We featured the original build from [TheRasteri] a while back which goes into details about how it’s possible to run such a resource-intensive game on a comparatively weak system. You just have to enter the cheat code “RASPI”. After all the heavy lifting is done, it’s time to put it into a realistic-looking cartridge. To get everything to fit in the donor cartridge, first the ICs in the cartridge were removed (except the lockout IC) and replaced with custom ROM chips. Some modifica...
Post a Comment
Read more

The Flexible Permanence of Copper Tape Circuits

Somewhere between shoving components into a breadboard temporarily and committing them to a piece of protoboard or a PCB lies the copper tape method. This flexible Manhattan-style method of circuitry formed the basis for [Bunnie Huang]’s Chibitronics startup, and has since inspired many to stop etching boards and start fetching hoards of copper tape. [Hales] hit the ground running when he learned about this method , and has made many a copper tape circuit in the last year or so. He offers several nice tips on his site that speak from experience with this method, and he’ll even show you how to easily work an SMD breakout board into the mix. Generally speaking, [Hales] prefers plywood as the substrate to paper or cardboard for durability. He starts by drawing out the circuit and planning where all the tape traces will go and how wide they need to be. Then he lays out copper traces and pads, rubs the tape against the substrate to make it adhere strongly, and reinforces joints and laps w...
Post a Comment
Read more

The Newbie’s Guide To JTAG

Do you even snarf? If not, it might be because you haven’t mastered the basics of JTAG and learned how to dump, or snarf, the firmware of an embedded device. This JTAG primer will get you up to snuff on snarfing, and help you build your reverse engineering skills. Whatever your motivation for diving into reverse engineering devices with microcontrollers, JTAG skills are a must, and [Sergio Prado]’s guide will get you going. He starts with a description and brief history of the Joint Test Action Group interface, from its humble beginnings as a PCB testing standard to the de facto standard for testing, debugging, and flashing firmware onto devices. He covers how to locate the JTAG pads – even when they’ve been purposely obfuscated – including the use of brute-force tools like the JTAGulator . Once you’ve got a connection, his tutorial helps you find the firmware in flash memory and snarf it up to a file for inspection, modification, or whatever else you have planned. We always apprec...
Post a Comment
Read more